Your Tailored Stocktake Steps

1. Tap Reporting.
2. Set Inventory Reports to Committed Stock Report.
3. Tap Open Report and clear the option Only show items with stock. 
4. Tap Run Report.

1. Tap, hold and drag Department into the column heading.

2. Tap Item Description column heading to sort alphabetically.

3. Tap Print Preview.

4. Tap File, then Print.

5. Tap Print.

   The list of all items with committed quantities is printed.

6. Tap File, then Exit.

   Use the printed list to check committed quantities accuracy against what is actually awaiting collection in your store.

1. Right click on the grey bar above the column headers and select Full Expand.

2. Tap the first item line of the report to focus on the results displayed.

3. Press CTRL + A on the keyboard to select all items on the report.

   The CTRL and SHIFT keys while tapping can be used to select only those items you want to set to zero instead.

4. Right-click and select Item Quick Action.

5. If the Welcome screen appears, tap Next.

6. Tap to expand the Inventory tree. 

7. Tap Set or Adjust the Committed Quantity, then Next.

8. Leave the options set as shown on the Configure Actions step, then tap Next.

9. Tap Confirm to apply these changes, then tap Next.

10. Tap Finish.

1. Tap Inventory.

2. Tap Items.

3. Search for and open the item of interest.

4. Type the actual Committed quantity.

5. Tap Save and Close.

6. Repeat for all items on the report (as appropriate) as well as items not on the report that do have a committed quantity figure.

1. Tap Assistants, then Stocktake.

2. Tap New and Enter a name and description for your stocktake.

3. Tap Full store stocktake.

   This ensures any item not counted will have their SOH figure reset to zero when the stocktake file is committed.

4. Tap Set stock on hand to point stock count was performed.

   This option changes the quantity in the system to the quantity counted. This change is applied at the time the stocktake file is committed. For this reason, this entire process must be completed after hours (including committing the stocktake file).

   This option does not take into account any sales of stock or orders received, therefore this option is only recommended for an after hours stocktake.

5. Tap OK.

6. Tap Save and Close.

1. Tap Print Stocktake, then File.

2. Tap Print to print a List of all items in your store.

3. When done, tap File, then Exit.

4. Tap Save and Close to close the stocktake file.

If you would like to do smaller sections at a time, you can filter the stocktake file by Department prior to printing the stocktake . Then, click on the Description column heading to sort alphabetically.

1. Count all stock in your store and stockroom, writing the quantities on the stock take list previously printed.

   Ensure all orders have been received in prior to commencing your stocktake count. Your count must include all stock in the store including stock on shelves and any committed stock awaiting collection.

1. Tap Assistants, then Stocktake.

2. Right-click to open the Stocktake file.

3. Tap on the column headers (e.g Department, Description) if required to sort the list of items to be the same as the printed list.

   Alternatively, tap on Search Bar. Use the search fields to find items.

4. Tap into the Counted field and type the quantity counted for the item.

5. Press the down arrow on the keyboard to move to the next line or search for the next item.

6. Continue until all quantities counted have been entered.

7. Press Save and Close.

1. Tap Assistants, then Stocktake.

2. Right-click to open the Stocktake file.

3. Review discrepancies:

   • The Counted column is what was actually counted in your store.

   • The SOH When Counted field is the item’s SOH figure in Fred Office Plus when the item was counted.

   To assist you to review these figures, set the options Hide items with no differences and Use colour coding. This is found under the Count Method drop down on the stocktake form.

4. If any counted figures are suspected to be incorrect, re-count and edit counted quantities if required.

   

1. Tap Protect to prevent any further changes being made to the stock take file.

2. Tap Calculate. The Data Assistant Stock Take Discrepancy window appears and will show the final outcomes from the stock take count.

If you are not ready to commit your Stocktake (this cannot be undone), tap Cancel, then Unprotect to return to the main Stocktake screen and edit quantities.

1. Tap Commit.

2. Tap Yes to commit.

   This cannot be undone.

   The Current Count quantity will be set as the item’s new SOH quantity.